Changing The Unit Of Measurement Mm / Inch (Unit) - Kroeplin G0 Serie Manual De Instrucciones

Zero point adjustment (OFFSET)
7 ...Reducing the first digit
short
8 Selecting the next digit
1x short
Repeat step 6-8 until the OFFSET value is totally entered.
9
10 For confirming and saving
1x long
Afterwards you will return to the SETUP -
11
Menu.
12 Quitting the SETUP – Menu
1x
short
For confirming and saving.
13
The instrument returns to the last program used
1x long
The instrument must be adjusted until the nominal value reached!
If „ERR 07" appears in the display the OFFSET value is out of the acceptable
range ( Technical Data). The instrument must be returned to the
manufacturer for checking.

Changing the unit of measurement mm / inch (UNIT)

You can select between „mm" and „inch".
The gage must be switched on. The SETUP – Menu can be activated in each program.
43