Self Clean - Samsung WF42H5000A Serie Manual Del Usuario

SELF CLEAN+
3. Press the Start!Pause button.
When you press the Start/Pause button, Self
Clean+ begins.
Self Clean+ is a self-cleaning cycle that removes mold that may occur inside the washing machine.
1. Press the Power button. _ ..........
2. Press the Self Clean+ button. _ ,,_;:_,"--_
, Once the Self Clean+ button is pressed, the only _ 'i _'JI
function that can be set is Delay End .......... .............. ................ "'_
Using Self Clean+, you can clean the drum, tub and diaphragm without using a cleansing
agent.
Never use Self Clean+ when laundry is in the washing machine. It may cause damage to the
laundry or a problem with the washing machine.
if you want to use a drum cleansing agent, use only 1110 of the amount of the drum
cleansing agent recommended by the cleansing agent manufacturer. (When using a
powder-type cleansing agent, remove the liquid detergent
compartment.)
_The Self Clean+ Auto indicator Function
If the "Self Clean+" button is lit after a wash, it indicates
that tub (drum) cleaning is required. In this case, remove
the laundry from the washing machine, turn the power on,
and dean the drum by running Self Clean.
If you do not run Self Clean+ after every 40 washes, the
"Self Clean+" indicator turns off after one hour. However,
the "Self Clean+" indicator will light again after five
washes. Not running Self Clean+ at this point will not cause
a problem with the washing machine.
Although the Self Clean+ Auto Indicator appears once a
month or so, the frequency may differ depending on the
number of times the washing machine is used.