Gude GSH-TC-2 Traducción Del Manual Original página 28

ENGLISH
24
Do not dispose of electrical appliances in household
waste; use the local collection points. Ask your
local authority where the collection points are to
be found. If electrical equipment is disposed of in
an uncontrolled manner, weathering can lead to
dangerous substances entering the groundwater
and from there the food chain, or the flora and fauna
can be poisoned for years. If you replace the device
with a new one, the seller is legally obliged at the
least to take back the old one to be disposed of free
of charge.
Guarantee
Warranty period of 12 months applies to commercial
use and 24 months applies to private use and com-
mences on the day of purchase of the device.
The guarantee solely covers inadequacies caused
by material defect or manufacturing defect. Original
payment voucher with the sales date needs to be
submitted for any claim in the guarantee period.
The guarantee does not cover any unauthorised
use such as appliance overloading, use of violence,
damage as a result of any unauthorised interference
or caused by foreign items. Failing to follow the ope-
rating and assembly instructions and common wear
are also not included in the guarantee.
Failure removal
Failures
The filter does not darken regularly
and/or flickers.
The response has slowed down.
The visibility is poor.
The welding helmet slips
Service
Do you have any technical questions? Any claim? Do
you need any spare parts or operating instructions?
We will quickly help you and without needles bureau-
cracy at our web pages at www.guede.com in the
Servicing part. Please help us be able to help you. In
order to identify your device in case of claim we need
the serial No., product No. and year of production. All
this data can be found on the type label.
Important information for the customer
Please note that returns within or outside the warran-
ty period should always be in the original packaging.
This measure effectively avoids unnecessary transport
damage and any associated disputed ruling. Your
equipment is optimally protected only in the original
box, and keeping it in that box will ensure smooth
processing.
Seriennummer
Artikelnummer
Baujahr
Causes
The protector is contaminated or
defective.
The arc sensor is not clear.
The welding voltage is too low.
The environmental temperature is
too low/high.
The sensitivity is too low.
The protector / protective panel is
contaminated.
The ambient light is not sufficient.
The wrong darkening level has
been set.
The head band has been set
incorrectly.
Removal
Clean or replace the protector.
Clean the surface of the arc sensor.
Set the sensitivity to the maximum.
Use the welding helmet only at tem-
peratures between -5 °C and +40 °C
Set the sensitivity to a higher level.
Clean the protector and the protec-
tive panel.
Introduce more light to your working
environment.
Reset the darkening level.
Reset the head band and tighten it.