Danby Designer Ice'n Easy DIM1524W Manual Del Usuario página 12

Ocultar thumbs Ver también para Ice'n Easy DIM1524W:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Before
You Call
For Service
Problem
Possible
Cause
What to do
Ice Maker will not start.
A fuse in your home may
be blown or the circuit
breaker tripped,,
Power surge,.
Plug not fully inserted into
wall outlet
Water Shortage
Replace fuse or reset circuit breaker
Unplug the ice maker, wait a few
seconds and then plug it back in
Make sure the 3-prong plug on the
ice maker is fl_lly inserted into outlet
Ensure that there is sufficient water
in the internal reservoir,
Ice Bucket Full
Fault Mode
Empty the ice bucket,
See 'Fault Mode Icon' below.
Fault Mode Icon
illuminated in display
Water bucket cannot
turn
Water line blockage.
lce cubes may be lodged in between
the water box and evaporator,
Power
off the unit and manually remove any
ice cubes from the water bucket andt
or ice shovel.
This can occur when attempting to
operate the unit (or if it has been
stored) in low ambient temperature
conditions.
Allow the unit to remain
in 68 F (20 C) for a few hours before
attempting to make ice or operating
the self-clean mode,,
If none of the above
rectify the situation
please
contact
our customer
care department
at 1-800-26-l_llrlll_'
(I-800-263-2629)
11
Tabla de contenido
loading

Tabla de contenido