Siemens V2 Instrucciones De Servicio página 88

Datos técnicos
7.1 Certificados y homologaciones
Homologación UL
Tenga en cuenta las siguientes indicaciones:
• The device shall be supplied from an isolating source.
• Only for use in LAN, not for connection to telecommunication circuits.
Underwriters Laboratories Inc. según
• UL 61010-2-201
Números E-file:
– Variantes estándar, variantes Extended y aparatos PRO: E116536
– Monitores Ethernet: E472609
• CAN/CSA C22.2 No. 61010-2-201
o
Underwriters Laboratories Inc. según
• UL 61010-2-201
Números E-file:
– Variantes estándar, variantes Extended y aparatos PRO: E222109
– Monitores Ethernet: E472610
• CAN/CSA C22.2 No. 61010-2-201
• UL 121201 (Hazardous Location)
• CAN/CSA C22.2 No. 213 (Hazardous Location)
Approved for use in
• Class I, II, III, Division 2, Group A, B, C, D, E, F, G; T4
• Class I, Zone 2, Group IIC T4
• Class II, Zone 22, Group IIIA, IIIB, IIIC T135
Homologación FM
Factory Mutual Research (FM) según
• Approval Standard Class number 3611, 3600, 3810, ANSI/ISA 61010-1, ANSI/UL 121201
• CAN/CSA C22.2 No. 213
• CAN/CSA C22.2 No. 61010-1
Approved for use in
• Class I, II, III, Division 2, Group A, B, C, D, E, F, G; T4
• Class I, Zone 2, Group IIC T4
• Class II, Zone 22, Group IIIA, IIIB, IIIC T135
Installation Instructions for cFMus:
WARNING – Do not remove or replace while circuit is live when a flammable or combustible
atmosphere is present.
WARNING – Substitution of components may impair suitability of the equipment.
88
IFP V2, IFP V2 PRO, IFP V2 ETH
Instrucciones de servicio, 08/2020, A5E46641444-AB