Control Card Connection And Adjustment - Accessmatic Buldozer 824 Manual De Usuario

824
Opening your life
Warnings
• To ensure safety, install safety stop blocks on both ends of the rail to prevent the gate from running out of the rail. Before installing the
main machine, make sure that the safety stop blocks are installed in place, and check whether it has the function of preventing the gate
from running out of the rail or safety range.
• Please make sure that the main machine and its components have good mechanical properties, and the gate can be operated exibly
when manually moved before installing the main machine.
• Please note that for this product, one control can only drive one main machine, otherwise, the control system will be damaged.
• Earth leakage circuit breaker must be installed in where the gate movement can be seen, and the minimum mounting height is 1.5m
to avoid being touched by children.
• After installation, please check whether the mechanical property is good or not, whether gate movement after manual unlocking is
exible or not, whether the installation for infrared sensor (optional) is correct and e ective.
4.3.4 Motor Installation
FIG.9
5. Control Board Connection and Adjustment
5.1 Wiring Instruction
FIG.10
BD824 Control board
9