Makita XFD11 Manual De Instrucciones página 49

Presetting stations in AM/FM mode
There are 5 preset stations each for AM and FM radio.
They are used in the same way for each waveband.
1. Press the Power button
2. Press the Source button
waveband. Tune to the required radio station as
previously described.
3. Press and hold the required Preset button (1 to 5)
until the display shows "P4" for
example after the frequency. The station will be stored
using the preset number. Repeat this procedure for
the remaining presets as you wish.
4. Preset stations which have already been stored may
be overwritten by following the above procedure if
required.
Display modes – FM
Your radio has a range of display options for FM radio
mode.
1. Repeatedly press the Menu/Info button
the RDS information of the station you are listening to.
a. Station name Displays the name if the station being
listened to.
b. Program type Displays the type of station being
listened to such as Pop, Classic,
News, etc.
c. Radio text Displays radio text message such as
new items etc.
d. Year/Day Displays the year and day of the
week according to the date setting of
your radio.
e. Date/Day Displays the date and day of the
week according to the date setting of
your radio.
f. Frequency Displays the frequency of the FM for
the station listened to.
FM stereo (auto)/mono
If the FM radio station being listened to has a weak signal
some hiss may be audible. It is possible to reduce this
hiss by forcing the radio to play the station in mono rather
than stereo.
1. Press the Power button
FM band and tune to the desired FM station as
previously stated.
2. Press and hold Menu/Info button
menu setting.
3. Rotate the Tuning control knob
mono setting shows on the display. If the setting is
Auto press the Tuning control knob to switch to Mono
mode to reduce the hiss. Press the Tuning control
knob to select the option.
Recalling a preset in AM/FM mode
1. Press the Power button
to switch on your radio.
to select the desired
to view
as needed to select the
to enter the
until the FM Auto/
to switch on your radio.
2. Press the Source button
mode.
3. Momentarily press the required Preset button
to cause your radio to tune to one of
the stations stored in the preset memory.
Clock and Alarms
Setting the time and date format
The clock display used in stand-by mode and on the
playing mode screens can be set to different format. The
selected format is then also used when setting the alarms.
1. Press and hold the Menu/Info button
menu setting.
2. Rotate the Tuning control knob
appears on the display and press the Tuning control
knob to enter the setting. You will see the time
format begins to flash.
3. Rotate the Tuning control knob
or 24 hour format. Press the Tuning control knob
confirm your choice of clock format.
Note: If the 12 hour clock format is chosen, the radio
will then use the 12 hour clock for the setting.
4. Press and hold the Menu/Info button
menu setting.
5. Rotate the Tuning control knob
THU APR 3) appears on the display and press the
Tuning control knob
see the date format begins to flash.
6. Rotate the Tuning control knob
desired date format. Press the Tuning control knob
to confirm your choice.
Setting the clock time and date
1. Press and hold the Menu/Info button
2. Rotate the Tuning control knob
appears on the display. Press the Tuning control knob
to enter the setting.
3. The hour setting on the display will begin flashing.
Rotate the Tuning control knob
desired hour, and press the Tuning control knob
confirm the setting. Then rotate the Tuning control
knob to select the desired minute, and press the
Tuning control knob
4. Rotate the Tuning control knob
appears on the display. Press the Tuning control knob
to enter the setting.
5. Rotate the Tuning control knob
desired year and press the Tuning control knob
confirm the setting. Then rotate the Tuning control
knob to select the desired month, and press the
Tuning control knob
rotate the Tuning control knob
to select AM or FM radio
to enter the
until "CLOCK xxH"
to select either 12
to enter the
until a date (e.g.
to enter the setting. You will
to select the
.
until "CLOCK ADJ"
to select the
to confirm the setting.
until "DATE ADJ"
to select the
to confirm the setting. Then
to select the desired
to
to
to
9