Connect Power Cables - Westinghouse LVM-42w2 Manual Del Usuario

4. Connect power cables
Connect the power cord to the HD Monitor then to a properly grounded AC outlet.
5. Turn Power On
Press the Power ON button on the right side of the HD Monitor, or press the Power ON
(Red) button on the remote control.
Power Button
6. Select input source for the HD Monitor using the OSD menu or remote
control
7.
If connecting to a PC (VGA/DVI1/DVI2):
For the best picture quality, set the HD Monitor resolution to 1920 x 1080 at 60Hz (refer
to the graphic card's user guide to set this resolution).
13