Maintenance; Decommissioning; Spare Parts Service; Warranty Conditions - Schneider Airsystems RF-RM geeicht Manual De Instrucciones

GB
RF
Operation:
1. Push the connector onto the valve. Hold
the hose securely when filling or adjust-
ing.
2. Press the trigger
(Fig. 2a, 1.). Filling process starts.
3. Release the trigger lever (Pos. 02). Read
the tyre pressure on the pressure gauge
(Pos. 04).
4. Excessive tyre pressure: press the trig-
ger lever (Pos. 02) halfway or actuate
the venting valve (Pos. 03) (Fig. 2a, 2.).
Tyre pressure is adjusted.
After use:
1. Disconnect the quick-action coupling
from the plug
(Figure 1b).
2. Clean and store the device in dry condi-
tion
2.6

Maintenance

Prevent stiffness, leaks: lubricate the valve
pin and pivot point on the trigger lever
(Pos. 02).
2.7

Decommissioning

Storage: Clean, dry, free from dust, above
5° C.
Disposal: Dispose of packaging / machine
according to valid statutory regulations.
II/ 6
lever (Pos. 02)
nipple (item 01)
2.8

Spare parts service

Visit our website
tems.com/td/ for the latest version of all ex-
ploded drawings and spare parts lists for our
products. If you have any special questions,
please consult the Schneider Airsystems Ser-
vice centre in your country (addresses in the
service appendix) or your local dealer.
2.9

Warranty conditions

Basis for warranty claims: complete unit
in original condition/proof of purchase.
According to legal provisions, you re-
ceive the following warranty against
material and manufacturing defects:
private use only: 2 years,
commercial use: 1 year.
Excluded from warranty claims: Wear or
expendable parts, improper use, overloading
/ incorrect pressure, manipulation / inappro-
priate use, inadequate / incorrect / lack of
maintenance or lubrication, bumps / im-
pacts, dust / dirt accumulation, unauthorised
/ incorrect working procedures, incorrect
power supply, impure / insufficiently filtered
compressed air, failure to read the instruc-
tion manual, incorrect operating resources /
materials.
www.schneider-airsys-