FALMEC Luce Manual De Instrucciones página 19

Speed 4 button
With LED on (speed 4 already running):
• Nothing will happen when this key is pressed. To switch the hood off firstly select speed 1, then press the "speed 1 button" again.
With the LED off and a speed on:
• Press the key (long or not) to set the hood on speed 4. When speed 4 is running the relative LED will start flashing; the 4th, or intensive, speed is timed
and after approximately 7 minutes the motor will automatically switch to 3rd speed.
With the LED off and NO speed on:
•
Nothing will happen when this key is pressed.
Light Button
Light:
•
By briefly pressing the key (the back-lit button), you turn the light on and off.
LIGHTING
The hood has fluorescent lamp lighting.
If the lamp ever needs to be replaced:
•
disconnect the appliance from the electrical mains power supply by unplugging it or turning off the main switch;
I
Phase page 6
remove the covering element (N) (Fig. 1 and 2 );
•
take out the blown fluorescent tube (M) (Fig. 3 and 4 );
•
put in a new fluorescent lamp by performing, in reverse order, the operations described in Fig. 3 and 4 ;
•
The new fluorescent lamp must be identical to the old one!
put the covering element back in (N) performing, in reverse order, the operations described in Fig. 1 and 2 ;
•
•
connect the appliance back up to the electrical power mains.
19