Getting Started And Operation - Hama 00176590 Instrucciones De Uso

Warning – Danger of hearing loss
due to alarm
• Loud volumes, even over short periods, can
cause hearing loss.
• Please note that when the alarm is triggered
or when you are testing the device, the
emitted signal tone generates high sound
pressure that can quickly cause hearing loss.
• Make sure you are not in the immediate
vicinity of the alarm speaker for more than
3 minutes during a test or when the alarm
is triggered.

4. Getting started and operation

It's so simple:
• Download the Hama Smart Solution app from the
Apple App Store or the Google Play Store.
• Open the Hama Smart Solution app.
• If you're using it for the rst time, you'll have to
register and create a new account. If you already
have an account, log in using your login details.
• First you have to integrate the siren in the app.
To do so, you connect the siren to the included
USB cable and to a permitted power supply unit.
Please also refer to the operating instructions for
the power supply unit.
• Then connect the power supply unit to a properly
installed socket.
• If you want to operate the siren using battery
power, turn the bottom of the device clockwise
and remove it. Now insert type CR123A batteries
with the correct polarity. For standard mains
operation, no batteries are necessary.
• Wait until the LEDs begin to ash quickly.
4
• Click '+' in the upper-right corner in the app and
select the 'Sensors' category.
• Click 'OK' to con rm that the siren is ashing
quickly.
• Then enter the name of your WiFi network and
the password, and con rm.
• Once the connection has been established, the
app con rms that the siren was connected. You
can now give it a name.
• Click 'Finish' to complete the process.
• You can now rename, set and con gure your
device.
Note – Pairing restart
First remove the bottom of the device by
turning it clockwise. Press and hold the Reset
button on the bottom of the siren for about 5
seconds until the device ashes quickly.