MIRKA MIRO 955 Instrucciones De Manejo página 14

THE CARBON BRUSHES
The carbon brushes are a normal wearing part and must be replaced when they reach their wear
limit. When the brushes are worn to a length of 1/4", they should be replaced.
NOTE: Checking and replacing the carbon brushes should be entrusted to a qualified service
center.
TO CHANGE THE BRUSHES
1.
Unplug the machine.
2.
Remove the brush cap with a slothead screwdriver
3.
Remove the brush.
4.
Install new brushes in reverse order and replace covers
Brush Cap
If the replacement of the power supply cord is necessar y, this has to be done by the
manufacturer or their agent in order to avoid a safety hazard.
14
10