Product Features; Getting Started - Gear4 AirZone Series 3 Manual Del Usuario

AirZone Series 3

Product Features:

■ AirPlay
■ Volume control dial
■ Charges iPod / iPhone / iPad
■ Line-in port for use with other music players

Getting started:

■ Plug the power cable into the back of the unit
and then into the mains supply.
■ To switch the speaker on, press the POWER
switch at the back of the unit.
■ The indicator on the front of your AirZone
Series 3 will turn purple and then red. This
will mean that the speaker is ready for set-up.
Set-up:
■ To stream music wirelessly to the AirZone
Series 3, the unit first needs to be registered
to your wireless home network.
■ There are several ways to register your
AirZone Series 3 to your wireless home
network.
Using an iPod / iPhone / iPad:
■ Make sure that your iPod / iPhone / iPad is
connected to the wireless network to which
you want to connect your AirZone Series 3.
2 GEAR4 | AirZone Series 3 | User Manual
PG733US_AirZone_Series3_Manual_V1.0.indd 2
Please read before use.
■ Connect your iPod / iPhone / iPad to your
AirZone Series 3 via the USB port at the back
of the speaker using the cable supplied with
your iPod / iPhone / iPad.
■ Press and release the PAIR button at the rear
of your AirZone Series 3.
■ On your iPod / iPhone / iPad there will be a
message on the display asking if you want to
share the network details currently used by
your iPod / iPhone / iPad with your AirZone
Series 3.
■ Click to allow. The indicator at the front of your
AirZone Series 3 will change colour from red
to blue and give a confirmation tone to confirm
successful pairing. This may take a little time
depending on the strength of the wireless
connection.
Note: The above method of pairing will only
work with devices using iOS5.0 and above. If
your iPod / iPhone / iPad uses an earlier version
of iOS, then please use the method described
below (Using a Mac or PC) to register your
AirZone Series 3 to your wireless home network.
Using a Mac or PC:
■ Make sure there are no devices connected to
your AirZone Series 3.
■ Press and release the PAIR button at the rear
of your AirZone Series 3.
17/08/2012 16:54