System Setup Menu; General Setup Menu - Jensen VM9311TS Manual De Instrucciones

VM9311TS

SYSTEM SETUP MENU

In "System Setup" mode, "ASP CONFIG", "GENERAL
SETUP" and "SCREEN CAL" are available for adjustment.
Setup can be performed by pressing the dedicated button on
the remote control or by touching the top left corner of the
TFT screen.
For system settings, press the SYS SETUP button (31) on
the remote control or touch "SETUP" on the screen to enter
the "SETUP" menu. "SYS SETUP" is highlighted in green.

General Setup Menu

Accessing the General Setup Menu
To access the "GENERAL SETUP" Menu, press the direction
buttons on the joystick (16, 17, 18, 19) or remote control (14,
17, 18, 19, 22) to highlight "GENERAL SETUP" in green.
DIRECTION BUTTONS
Press the >/|| button (18) on the remote control to enter the
"GENERAL SETUP" menu. A menu appears with the option
for the first item, "Radio", highlighted in light blue.
GENERAL SETUP
USA
Screen Saver
Video Format
Beep On
Selecting a Feature for Adjustment
Press the >> or << buttons (14, 22) on the remote control or
the /\ or V buttons (18, 19) on the joystick to select the feature
to be adjusted.
Adjusting a Feature
1. Enter the option field for the feature you want to adjust
by pressing the >/|| button (18) on the remote or by
pressing the ENTER (joystick) button (20) on the unit. A
submenu appears in a second row with the selected
option highlighted in light blue.
2. Select a new value by pressing the >> or
22) on the remote control or the /\ or V buttons (18, 19)
on the joystick.
3. Confirm your selection by pressing the
buttons (14, 17, 19) on the remote control, or the < or >
button (16, 17) on the joystick. The new value is
highlighted in light blue and setup is complete.
Table 5: General Setup Menu Features
Setting Options
Radio USA
Europe
South
America 1
South
BACK
America 2
Arabia
Korea
buttons (14,
<<
Clock Mode
, |<<, or >>|
<<
Screen Saver
Video Format
(Input cir-
Function
cuitry auto-
detects the
• AM Frequency Spacing - 10kHz
video signal
• AM Frequency Band -
from the Aux
530kHz~1720kHz
In source).
• FM Frequency Spacing - 200kHz
• FM Frequency Band -
87.5MHz~107.9MHz
TFT Auto
Open
• AM Frequency Spacing - 9kHz
• AM Frequency Band -
522kHz~1620kHz
• FM Frequency Spacing - 50kHz
• FM Frequency Band -
87.5MHz~108.0MHz
• AM Frequency Spacing - 10kHz
• AM Frequency Band -
Beep
530kHz~1720kHz
• FM Frequency Spacing - 100kHz
• FM Frequency Band -
87.5MHz~108.0MHz Clock
• AM Frequency Spacing - 5kHz
• AM Frequency Band - BACK
520kHz~1600kHz
• FM Frequency Spacing - 100kHz
Adjusting the Clock
• FM Frequency Band -
87.5MHz~108.0MHz
Method 1 – TFT screen open:
• AM Frequency Spacing - 9kHz
1.
• AM Frequency Band -
531kHz~1620kHz
• FM Frequency Spacing - 100kHz
2.
• FM Frequency Band -
87.5MHz~108.0MHz
• AM Frequency Spacing - 9kHz
3.
• AM Frequency Band -
531kHz~1602kHz
• FM Frequency Spacing - 200kHz
• FM Frequency Band -
88.1MHz~107.9MHz
4.
Method 2 – TFT screen closed:
13
Table 5: General Setup Menu Features
Setting Options Function
China • AM Frequency Spacing - 9kHz
• AM Frequency Band -
522kHz~1620kHz
• FM Frequency Spacing - 100kHz
• FM Frequency Band -
87.5MHz~108.0MHz
12H Clock displays 12 hour time using
AM and PM.
24H Clock displays 24 hour time up to
23:59.
On Turn screen saver on/off.
Off
Auto The color signal output is switched
automatically based on the current
video input signal - NTSC or PAL.
NTSC The color signals are output in the
standard NTSC format.
PAL The color signals are output in the
standard PAL format.
On The TFT panel automatically opens
when the unit is turned on.
Off You must press the OPEN button
(1) to open the TFT panel.
Manual When the ignition is turned OFF, the
TFT panel DOES NOT retract if it
was previously out
On When turned on, an audible beep
tone confirms each function selec-
tion.
(HH:MM) See "Adjusting the clock" to learn
how to set the clock.
Return to previous menu.
Access the "Clock" setting under the General Setup
menu.
Press the >> or buttons (14, 22) on the remote
<<
control or the /\ or V buttons (18, 19) on the joystick to
move the cursor to the "Hour" or "Min" position.
Press the |<<, or >>| buttons (17, 19) on the remote
control or the < or > buttons (16, 17) on the joystick to
adjust the hour or minutes.
Press the button (14) on the remote control to confirm
<<
setup.