Sunbeam Toast LOGIC 3806 Manual De Instrucciones página 5

1. BEFORE USE remove any stickers and wipe the body of your toaster with
a damp cloth.
2. Ensure that before plugging the toaster into the outlet, the bread carriage lever is in the
uppermost position.
3. Plug cord into appropriate outlet. Position toaster at least three inches away from wall
or rear of counter.
4. Let the first toasting process take place without inserting any bread to preheat the new
elements and burn off any dust which may have accumulated during storage. Follow
instructions 5, 6, and 7.
5. Select the desired level of darkness by sliding the light/dark selector on the side panel
of the toaster to the right for darker toast and to the left for lighter toast. Your selection
should vary based on the moisture content, thickness of bread, whether fresh or frozen
and your darkness preference.
6. After selecting desired level of darkness, place bread in slot and depress bread carriage
lever downwards until it locks. Carriage lever will not stay down if toaster
is not plugged in. The self-adjusting bread guides will automatically center the
bread for even browning.
7. After the desired level of darkness has been reached, the bread will pop up
automatically and is ready for removal from the slots. The bread carriage lever
will return to its uppermost position and disconnect the elements, ready for
the next toasting.
8. To remove jammed toast, unplug toaster and remove bread once toaster
has cooled down. Never insert fingers or utensils into slots.
DO NOT WRAP THE CORD AROUND THE MAIN BODY
OF APPLIANCE DURING OR AFTER USE.
Using Your Toaster
5