Product Description; Cleaning And Care - GUTMANN SOMBRA Instrucciones De Uso

the lighting, additional functions of some
hoods are also controlled via the control
panel. The illumination of the hob is
provided by several LED lighting elements.
For reasons of hygiene, the extractor hood
is made from stainless steel in conjunction
with glass elements.
1 Upper chimney
2 Lower chimney
3 Switch panel
4 Metal grease filter
5 Lighting LED
6 Hood body
7 Swivel-mounted stainless steel sheet
8 Damper

Product description

Switch Panel
The switch panel consists according to the
model type of five or seven key buttons.
Power of the supercharger
The first four buttons control the power of
the supercharger.
Button „1" = low performance of the
supercharger
Button „2" = middle performance of the
supercharger
Button „3" = high performance of the
supercharger
Button „Int" = intensive level
Press any button to switch on the extractor
hood. The hood is switched off by pressing
the back-lighted keys once more. The
extractor hood automatically switches back
after 3 min. from the intensive level to level
3 (high performance of the supercharger).
Automatic Cool Down Period
The automatic cool down period is activated
by pressing the button with the clock symbol.
The exhaust hood will progressively switch
from level 3 down to level 1 and run at that
level for approximately 15 minutes before
turning off.
Lighting
Press the button with the light symbol to
turn on the illumination. The illumination is
turned off by pressing the button again. LED
lighting not dimmable
Clean Grease Filter Alert
When the clean grease filter alert lights up
(right button), the filter must be cleaned. Af-
ter cleaning the filter, press and hold the
right button (3) for at least 10 seconds. The
alert light will turn off. The clean grease filter
alert will be activated after a maximum of
15 operating hours or 14 days (even if not-
hing has been cooked.
Room ventilation
Pressing (10sec.) the button clock symbol
activates/deactivates the room ventilation
function.

Cleaning and care

Cleaning of the surface
Risk of electric shock! Please separate the
extractor hood from the power supply
network by pulling the plug or the
disconnection of the fuse. Please pay
attention to the fact that no water seeps into
the appliance during the cleaning process.
Untimely cleaning of the surface saves later
a troublesome removing of stubborn
en