Main Tab - Greenlee Textron GVIS 300 Manual De Instrucciones

Main Tab

The Main tab contains all of the functions to perform a test, but before starting a test, the technician should set
up the appropriate settings by selecting the settings tabs. See the "Settings Tabs" descriptions below.
Analyze
After the appropriate setup has been made under the settings tabs, the technician can perform an analysis of a
fiber end face.
The Analyze button is enabled when a fiber cable is plugged into the Greenlee 400-HDP and it's focused.
Capture Image
When a live image is displayed in the image window, the Capture Image button is enabled on the Main tab.
Click on Capture Image to open the Save File window. Here you can create a new folder to save the image or
save it in an existing folder.
When a fiber end image is saved, the information under the Report Settings tab (Customer Company Name, for
example) is saved as well. Click on any of the saved images to load that image and the information about the
image into GVIS. When a report is created, the customer information is reported with the image.
Live Image
If a saved or analyzed image is displayed on the Main tab, click on the Live Image button to display the live
stream from the GVIS 400-HDP or GVIS 300.
Greenlee / A Textron Company
GVIS 300 • GVIS 400 • GPAD 250
Figure 6. Capture Image File Screen
15
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070