Salt Water System Part Table - Polygroup SUMMER WAVES Manual Del Usuario

SALT WATER SYSTEM PART TABLE

Button
Plug-in the AC plug with
GFCI into power outlet
Power (Standby mode)
Power (Normal mode)
Power (Boost mode)
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8 AM to 5 PM Mon. thru Fri.
MST. Extended operating days and hours during peak season requirements.
Function
After plug in, press the "RESET"
button to power on the unit.
Initial power mode, unit ready
Press over 2 sec. to toggle
between standby and lower case
power on, timer default is 12
hours.
Short press power button to
activate boost mode. Boost
operating is two times faster then
normal mode. Initial timer default is
8 hours. Short press the power
button again will toggle between
boost and normal mode.
OWNER'S MANUAL
Indicate Light
GFCI LED turn red
Standby mode (Standby LED
blinks once every 5sec.)
Standby LED flash constantly
every 0.5 sec. 12 hours timer
countdown starts.
Standby LED continuously on,
timer LEDs count down
Image
TEST
TEST
10 STAND BY
8
CELL STATUS
TIMER
6
(HOURS)
SALT LEVEL
4
WATER FLOW
2
10 STAND BY
8
CELL STATUS
TIMER
6
(HOURS)
SALT LEVEL
4
WATER FLOW
2
10 STAND BY
8
CELL STATUS
TIMER
6
(HOURS)
SALT LEVEL
4
WATER FLOW
2
15