Makita DMR202 Manual De Instrucciones página 5

Altavoz inalámbrico de trabajo
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
10. To avoid risk, the manual of replaceable the battery should
be read before use. And the max discharging current of
the battery should be greater than or equal to 8A.
11. The contained lithium-ion batteries are subject to
the Dangerous Goods Legislation requirements. For
commercial transports e.g. by third parties, forwarding
agents, special requirement on packaging and labeling
must be observed.
For preparation of the item being shipped, consulting an
expert for hazardous material is required. Please also
observe possibly more detailed national regulations.
Tape or mask off open contacts and pack up the battery
in such a manner that it cannot move around in the
packaging.
12. Follow your local regulations relating to disposal of
battery.
13. Use the batteries only with the products specified
by Makita. Installing the batteries to non-compliant
products may result in a fire, excessive heat,
explosion, or leak of electrolyte.
CAUTION:
• Danger of explosion if battery is incorrectly replaced.
• Replace only with the same or equivalent type.
• Only use genuine Makita batteries. Use of non-
genuine Makita batteries, or batteries that have been
altered, may result in the battery bursting causing fires,
personal injury and damage. It will also void the Makita
warranty for the Makita tool and charger.
Tips for maintaining maximum battery life
1. Charge the battery cartridge before completely
discharged. Always stop tool operation and charge the
battery cartridge when you notice less tool power.
2. Never recharge a fully charged battery cartridge.
Overcharging shortens the battery service life.
3. Charge the battery cartridge with room temperature
at 10 °C - 40 °C (50 °F - 104 °F). Let a hot battery
cartridge cool down before charging it.
4. Charge the battery cartridge if you do not use it for a
long period (more than six months).
Explanation of general view (Fig.1)
1. Battery compartment locker
2. Mobile (Cell phone) placing panel
3. Volume up button
4. Volume down button
5. Play mode button
6. Next folder button
7. Next track button/Fast-forward button
8. LCD display
9. Play/Pause button
10. Previous track button/ Rewind button
11. Previous folder
12. Source button
13. Power button
14. Speaker
15. Handle
16. DC in socket
17. Auxiliary input socket
18. USB charging socket
19. Mobile storage cabinet cover
20. Cable hole
21. Mobile (Cell phone) storage cabinet
22. 14.4 V/18V battery terminal
23. 10.8 V-12Vmax battery terminal
24. USB playback socket
25. Battery cover
26. Battery cartridge
27. Button
4 ENGLISH
button/
Bluetooth pairing button
Tabla de contenido
loading

Tabla de contenido