Kangaroo Kn-18GH Manual De Instrucciones página 47

c) Starting in low temperature conditions
In low temperatures conditions can make starting adding oil into the cylinder as shown in the
pictures:
d) Oscillating speed setting motor
Start and warm up the engine. Adjust the idle speed with adjustable screw to standard idle
speed : 1500 ± 150 rpm. You must have the engine speed control lever as the following image:
e) Long term storage of other parts of the rammer
Check oil level in sign glass
Check and tighten the screws
of impact plate
Check and tighten the screws
of connection assembly
Check and tighten engine
screws
Clean engine cooling's fins
Change ramming system oil
Check and tighten other
connection screws
ENGLISH
Every time
before 5 hours later
operation
#
# #
# #
# #
# #
OPERATION
Every week or 25 Every month
hours
#
#
2B
100 hours
#
#
2B-9