Kangaroo Kn-18GH Manual De Instrucciones página 41

1.NEVER operate with the rammer for other
aplication than compact loose soils.
2.NEVER allow improperly trained people to
operate this equipment. People operating this
equipment must be familiar with the potential
risks and hazards associated with it.
3.NEVER touch engine or muffler while the
equipment is operating or inmediately after it
has been turned off. These areas get hot and
may be cause burns.
4.NO use accessories or attachtments, wich are
no recommended
TECHNOFLEX
Damage to equipment and/or injury to user
may result.
5.NEVER leave machine running unattended.
6.¡Stay tuned! Put attention to what you are
doing. Use common sense when working with
the machine. Never ues the machine when you
feel tired or under the influence of drugs
medicines.
7.Dont not wear loose clothes, jewelry or long
hair. Keep long hair, clothing and gloves away
from moving parts.
8.NEVER run machine indoors or in an enclosed
area unless adequate ventilation, through such
items as exhaust fans or hoses, is provided.
Exhaust gas from
poisonous carbon monoxide gas; exposure to
carbon monoxide
consciousness and may lead to death.
9.Keep your work area well lit.
10.Wear protective colthing when operating
equipment. Goggles or safety glasses will
protect against eye damage caused by flying
debris.
ENGLISH
by INDUSTRIAS
S.A. for this equipment.
the engine
can cause los
Save these instructions!
11.DO NOT use this machine without having
read,
procedures of this manual.
12.DO NOT force tool. Use the correct tool for
which it is designed.
13.DO NOT allow non-essential personnel or
visitors in the work area.
14.NEVER allow untrained personnel to
operate or service the equipment.
15.Sure the operator is familiar with safety
precautions before using the equipment.
16.ALWAYS keep the fuel valve closed, when
the equipment is not working.
17.Keep the equipment stored in a suitable
place when not in use. Equipment must be
estored in a clean, dry and out of reach of
children.
18.Replace worn or damaged parts with
replacement
recommended for use by INDUSTRIAS
TECHNOFLEX S.A.
19.Any servicing, other than that covered in
this
performed by an authorized INDUSTRIAS
TECHNOFLEX S.A Service Representative.
contains
20.ALWAYS work over smooth surfaces.
Avoid objects that may interference with the
s of
compacting operation can cause injury.
21.NEVER operate the machine outside the
using are; can be dangerous.
OPERATION
understood and
parts
instruction manual,
2B
followed the
designed and
should be
2B-3