Onda V-10 PLUS Manual De Instrucciones página 41

W
Lamp
Switch on the power(the Switch Mirror should be placed to the position as indicates).
Observe the entrance facular, and it should in the center of the entrance hole. If the facular
deviate to Left or Right, then loosen the No.1 screws in Fig. 5-8 and move the lamp seat
to Left or Right until it focus on the center of the slot. Then fix the screws. If the facular
deviate to Up and Down, then loosen the No.2 screws and move the lamp seat Up and
Down until the facular focus on the center of the slot. Then fix the No. 2 screws again.
Switch
Mirror
Step 6.
Finish
Reset the cover of the light chamber and fix the screws. Reset the cover of the instrument
and fix the screws. Recover the Pole in the compartment, then the course finished.
Adjust the position of the W lamp
Right Position
2
18
Filament
1