Status Light - Rimage Producer 7100 Manual Del Usuario

Ocultar thumbs Ver también para Producer 7100:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 102
Rimage Producer 7100™ and Producer 8100™ User Guide

Status Light

The Producer III can be equipped with an optional
status light that indicates various conditions.
The table below shows status light states and
explains the conditions indicated by each state.
Light state
Green light on
Green light blinking
Yellow light on
Yellow light blinking
Red light on
4
System condition
System is OK, no jobs are currently processing.
System is OK, jobs are processing.
Autoloader is waiting for the software to start. If the Control
Center is not started, switch on the Control Center. Check the
cable connections on the autoloader and Control Center.
• Front door may be open. Close the front door to allow jobs to
process.
• Print ribbon or media may be running low. Read the operator
panel to determine which supply is running low.
• Out of blank discs. Fill the supply bins with the appropriate
media type.
• System error requiring operator intervention. Check the
Control Center for a message.
• Equipment error at initial start up, such as a missing
carousel. Check the Control Center for a message.
Status Light
110867_A
Tabla de contenido
loading

Este manual también es adecuado para:

Producer 8100

Tabla de contenido