Changing The Password - Orbis ANRET Serie Manual De Uso

Changing the password

Press T from the "Code" menu to enter the password setting page
Press the "up" ( ) or "down" ( ) keys to select the first digit (flashing)
Press "pK" to go to the next digit
Press "T" to save the password and return to the main programming menu
Note: if you forget the password entered, the default password ("0000")
can be reset by resetting the instrument (this may also occur accidentally
if the power is cut off)
Relay programming
From the relay 1 (or 2) menu in normal programming, press "T" to gain access
to the relay 1 (2) programming menu
The parameters that can be set by the user are the following, in order:
Operating value
Latching
Alarm mode
Relay operating mode
Set-point value
Differential value
Relay activation delay
Press "T" to go from one menu to the next
Press T from the "Delay" menu to return to the relay 1 (or 2) menu
VOLTAGE
1
pK
pK
1
POWER
ACTIVE
- 58 -
User's Manual - ANRET Q-R / M-R
T
POWER
ACTIVE
2
T