Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Always follow all safety precautions
when
cleaning
and servicing the POWER-MATE_L
!
WARNIN 'G . ..................................
Electrical
Shock
Or Personal
Injury
Hazard
Disconnect
electrical
supply
before
servicing
or cleaning
the unit.
Failure to do so could
result
in elec-
trica!
shock
or persona]
injury from
cleaner
suddenly
starting.
1. Remove light
cover by pressing
in and lifting both
sides as shown.
Push In
_
2. Push in and turn
And Turn [_
bulb counterclock-
-'-._-..___,.-4 IIq
wise to
remove_
_.,"__6_._
3. Rep,ace the bu,b_
_
ulb must not be
higher than 15 Watts,
Close light cover until
it snaps in place.
NOTE: See PARTS AND FEATURES for
Bulb #.
Disconnect
cleaner from electrical outlet.
Check and remove hair, string and lint build-
up frequently
in the POWER-MATE
TM
brush
and brush support areas. If build-up
becomes
excessive, disconnect POWER-
MATE
TM
from wand and follow the steps
below. Instructions
can also be found under
the light cover
TO REMOVE BELT:
I. Remove light
cover and light
bulb as shown
under LIGHT
BULB
CHANGING.
2. Unscrew the
POWER-
MATE
TM
cover
screws°
3. Turn
POWER-
MATE
TM
over
To remove
cover, insert
screwdriver
at
cover tabs on
both sides and
twist to
release tabs.
Tab
Quick
Release
4, Turn POWER-
MATE
TM
right
side up. Press
handle release
pedal and lower
the swivel Tilt
cover forward
from back until
front snaps free.
14
Tabla de contenido
