Cleaning And Storage; Technical Specifications - Perel EHD1 Manual Del Usuario

5. Assembly
Refer to the illustration on page 2 of this manual.
• Place a foot [1] on either side of the bottom of the heater and fix using the included screws.
6. Use
Refer to the illustration on page 2 of this manual.
• Choose a suitable location taking into account the safety instructions above.
• Turn the thermostat [3] fully counter clockwise and insert the plug [2] into a suitable, grounded mains
socket.
• Turn on the heater elements by means of the rocker switches [4] as desired. Turn the thermostat [3]
fully clockwise. When the desired room temperature has been reached, the pilot lights [5] on the
switches [4] will go out. The heater will now keep the room at set temperature by switching on and off
automatically.
REMARK: There may be a particular smell when the heater is turned on after a long period of time. This is
perfectly normal.

7. Cleaning and Storage

• Unplug the heater and let it cool down before cleaning.
• Clean the housing with a slightly damp cloth. Wipe off with a soft cloth.
• Do not use detergents or abrasive cleaning products.
• Protect the heater from dust and store in a clean and dry place.

8. Technical Specifications

power supply
heating settings
power cord length
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device. For more info
concerning this product, please visit our website www.perel.eu. The information in this
manual is subject to change without prior notice.
© COPYRIGHT NOTICE
This manual is copyrighted. The copyright to this manual is owned by Velleman nv.
All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced
to any electronic medium or otherwise without the prior written consent of the copyright holder.
16.06.2009
EHD1/EHD2
230VAC~50Hz
1000W/2000W
1.5m
600 x 350 x 100mm
2.8kg
4
©Velleman nv