Initial Setup; Telescopic Pole - Steamfast SF-825 Guía Para El Usuario

Initial Setup

TELESCOPIC POLE

1. Connect Handle to upper, narrower end of Telescopic Pole.
To do this, simply slide Handle onto Telescopic Pole until
Release Button, located on Telescopic Pole, snaps through
small hole on Handle (Figure 1).
2. Insert lower, wider end of Telescopic Pole into Body. (Figure
2). Make sure Release Button, aligns with small hole on
Body. Press Telescopic Pole until Release Button snaps
through small hole on Body. Telescopic Pole should now be
secured to Body.
NOTE: In order to coax the Release Button through hole, it
may be necessary to rotate and adjust Telescopic Pole until
button aligns properly with hole.
3. To adjust the height of Telescopic Pole, press and hold Ex-
tension Lock downward (Figure 3). While holding Extension
Lock down, move Telescopic Pole until it is adjusted to the
desired height. Release Extension Lock, then move Tele-
scopic Pole again until it "clicks" securely into place
(Figure 4).
4. To disconnect Telescopic Pole for storage, press firmly on
Release Button while simultaneously pulling Telescopic Pole
away from Body.
8 English
Figure 1 Figure 2 Figure 3 Figure 4