Steaming - Steamfast SF-825 Guía Para El Usuario

How to Use

STEAMING

Before operating, make sure Microfiber Pad is properly at-
tached and Water Tank is filled with water.
NOTE: Refer to MOPPING RECOMMENDATIONS for tips on
recommended floor surfaces.
1. Unwrap Power Cord completely and plug into a 120V
grounded outlet.
2. Turn On by pressing Steam Power But-
ton located on the front of Body (A). The
Steam Indicator Light will illuminate red
when power is On (B).
3. Place Resting Pad on floor, so that the textured side faces
upward. Rest Sweeper Steamer Head on top of Resting
Pad, in order to help protect the floor surface from excess
heat and moisture (Figure 1).
Figure 1
NOTE: Place Sweeper Steamer Head on Resting Pad while
12 English
waiting for steam to start or when not in use.
After approximately 30 seconds of heat up time, the unit will
begin emitting steam. The unit is now ready for use. It is com-
mon to hear the water pump make a noise while it is producing
steam.
4. For best results, mop using a steady back-and-forth motion
over the floor, working your way backwards in order to avoid
walking over the freshly mopped area (Figure 2).
A
B
5. Once all water has been used, turn off the unit. If you wish
to continue mopping, place unit on Resting Pad and refill
Water Tank (Refer to FILLING THE WATER TANK for in-
structions).
6. When finished mopping, place Sweeper Steamer Head on
Resting Pad and turn unit Off by pressing Power Button.
Unplug Power Cord from outlet, then refer to STORAGE
AND CARE.
±
Figure 2
±