Vimar ELVOX EKKO 350A Manual Del Instalador página 10

EKKO
FIXING THE OPERATOR ATTACHMENT TO THE GATE
(to see the TABLES of the measures).
Before inserting the pin into the gate attachment, grease thoroughly.
Weld the base at the right height (Fig. 8).
Fix the EKKO 350A / EKKO 500A and try several times to open and to close
the gate, controlling that the operator does not touch the moving gate
COL
Column attachment
Z
Y
S1
X
S2
S3
8
YES !
Make sure to tighten
the bolt that fastens the
operator to the bracket
allowing it to rotate freely.
Observe the height 45 and make sure that the operator is horizontal
C
α
EN
L
ANT
Leaf attachment
Leaf attachment
EKKO 500A
EKKO 350A
A
B
8
NO !
The operator height
must not change in
the various movement
steps.
ANT 500
C
D
9