General Safety Rules; Product Specifications - RIDGID AC9955 Manual Del Operador

GENERAL SAfETY RULES

WARNING:
READ AND UNDERSTAND ALL INSTRUcTIONS.
Failure to follow all instructions listed below, may
result in electric shock, fire and/or serious personal
injury.
READ ALL INSTRUcTIONS
 KNOW YOUR PRODUcT. Read the operator's manual
for this product and for any tool being used with this work
station.
 MAKE SURE ALL MOvING PARTS ARE fREE fROM
INTERfERENcE.
 KEEP HANDS fREE Of ALL MOvING PARTS to avoid
pinching and other injuries.
 PLAcE THE WORK STATION ON A fIRM, LEvEL
SURfAcE where there is plenty of room to handle and
properly support the workpiece.
fEATURES

PRODUcT SPEcIfIcATIONS

Clamping range .................................................................................................................................................. 0 - 37-1/2 in.
Clamping force ............................................................................................................................................. 2,000 lbs. (1 ton)
Maximum load ............................................................................................................................................................ 220 lbs.
FIXED
CLAMP
LOCK / uNLOCK
LATCh
LEFT FRONT
LOCK KNOB
FOOT PEDAL
RELEASE
LEFT
FRONT
LEg
SLIDINg
CLAMP
FRONT LOCK
FOOT
PEDAL
2 - English
 MAKE SURE WORKPIEcES ARE PROPERLY
SUPPORTED.
 NEvER PERfORM WORK on the work station outside
the width of the front legs. Doing so may cause the work
station to become unbalanced and tip.
 cHEcK THAT ALL ScREWS AND KNOBS are tight and
legs are securely locked before operating this product.
 DO NOT USE AS A STEPLADDER, STANDING PLAT-
fORM, OR ScAffOLDING SUPPORT.
 STOP IMMEDIATELY If THE WORKPIEcE OR WORK
STATION MOvES WHEN OPERATING.
 SAvE THESE INSTRUcTIONS. Refer to them frequently
and use them to instruct other users. If you loan someone
this product, also loan these instructions.
REAR LOCK
KNOB
REAR
LEg
RIghT
KNOB
RIghT
FRONT
LEg
uNLOCK
LOCK
ARM
TRANSPORT
LOCK
Fig. 1