Danger Of Burning; Health Hazard; Operating Determinations - EuroLite FLASHLIGHT TUBE Manual Del Usuario

Ocultar thumbs Ver también para FLASHLIGHT TUBE:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Make sure that the power-cord is never crimped or damaged by sharp edges. Check the device and the
power-cord from time to time.
This device falls under protection-class II and features a protective insulation.
Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the
power-cord by the plug. Never pull out the plug by tugging the power-cord.
Please consider that damages caused by manual modifications to the device are not subject to warranty.
Never touch the device during the operation! The housing heats up to
the housing temperature
Never look directly into the light source, as sensitive persons may suffer an
epileptic shock (especially meant for epileptics)!
Never operate the stroboscope without protective shield! The flash tube is to be changed by qualified
personnel only!
Keep away children and amateurs!

OPERATING DETERMINATIONS

This device is a strobe for creating decorative effects. This product is only allowed to be operated with an
alternating voltage of 230 V, 50 Hz and was designed for indoor use only.
This device is designed for professional use, e.g. on stages, in discotheques, theatres etc.
Lighting effects are not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
The device must never be installed over areas, where persons may be seated or walk by.
Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
- - -m
The symbol
between light-output and the illuminated surface must be more than 0.5 meters.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
The maximum ambient temperature t
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!

DANGER OF BURNING!

HEALTH HAZARD!

determines the minimum distance from lighted objects. The minimum distance
must never be exceeded.
a
T
.
B
8
Tabla de contenido
loading

Tabla de contenido