Data Logging - AKO -15740 Manual De Usuario

Camregis
Ocultar thumbs Ver también para AKO-15740:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

7.2.9.- When printing after changing the roll of paper, it comes out normally but there is nothing
printed on it.
Make sure the paper is inserted properly. Since it is thermal paper, only one of the sides is printable (see section 6)

7.3 Data logging

7.3.1.-The unit doesn't display the data recorded on the current day
If the memory block containing the data of the current day also contains data from the previous day, in order to
access this you must enter into the previous day and move forward with the cursor up to the current day (See
chapter 3.3).
7.3.2.-I have changed the unit's configuration (recording interval, date/time, input description, units,
type of probe, etc.). Can I display the graphs on the screen?
Yes, using the method described in section 3.3.1 of this manual.
7.3.3.-If I stop the data recording do I lose the data stored?
No.
7.4 Operation
7.4.1.-I have set a timed recording. What happens if the power supply fails and the battery runs
down?
When the power supply returns, the unit will immediately start recording with the recording interval used in the last
recording saved.
7.4.2.-What happens if the logger boots with the battery disconnected or run down?
The unit will boot with the date/time of the last recording stored. If there is none, it will boot with the date
01/01/2009 and the configuration wizard will start (see installation manual).
7.4.3.-If recording is stopped can I display the stored data?
Yes, the stored data are visible irrespective of the operating mode.
7.4.4.-The battery symbol is flashing. What does this mean?
The battery is disconnected or not working properly.
7.4.5.-The screen has highly saturated zones and/or vertical stripes. What is this due to?
It could be due to too high a contrast value. You can adjust this via the configuration menu (See chapter 4.4).
7.4.6.- The display shows the stop timed recording icon
. How can I override this programming?
Access the recording mode menu, stop it and restart it in REC mode (see section 3.3.3).
39
Tabla de contenido
loading

Este manual también es adecuado para:

Ako-15750Ako-15780Ako-15742Ako-15752Ako-15782

Tabla de contenido