With Pc Or Ako-5005 - AKO -15740 Manual De Usuario

5.2- With PC or AKO-5005

Any AKO unit that has a comms port can be connected and it is possible to connect up to 127 units to a PC or to
the AKO-5005 web server.
Each of these units must have a different MODBUS address and in the case of CAMRegis loggers must be
configured as slaves. NONE must be in master mode.
Connection to PC
Allows you to display and capture the data of any connected unit and to configure its parameters using the
AKO-5004 or SOFTRegis software.
AKO-5004: For any AKO unit with RS485 (MODBUS) communication. If installed in a server the software can be
accessed from any PC connected to it or even from the Internet (requires the server to have an Internet connection
and fixed IP).
SOFTRegis: Only for loggers from the CAMRegis range. Not suitable for network operation.
Connection to AKO-5005
Web server that includes the AKO-5004 software. It can carry out the same functions as the PC, with the
advantage that it has a server dedicated to communication with the units.
A-
B+
A-
AKO-80024
B+
repeater *
GND
A-
B+ B+
A- A-
B+ B+
GND
*When connecting more than 31 units, use an AKO-80024 repeater.
**Use an AKO-14917 converter for each controller to be connected.
PC with AKO-5004 or
SOFTRegis
AKO-80039
converter
CAMCtrl CAMRegis
AKO-156xx AKO-157xx
AKO-14917
converter**
Tr- Tr-
Tr+ Tr+
GND GND
Tr- Tr-
Tr+ Tr+
GND GND
Red AKO-21904 AKO-21904
Black
Grey
35
LAN
or
AKO-5005
web server
CAMCombi
CAMAlarm
AKO-156xxx
AKO-52063/52064
AKO controllers
with communication
AKODUO AKODUO
ºC
ºF