Care and
Maintenance
(contort.e€
To Remove
the
Fine
Filter
and the
Micro
Filter:
1. Lift the Fine Filter from the dishwasher
floor
as shown
Figure 35
in Figure
35 and
flush it
clean by
holding it
under
running
water.
2_
Remove
the Micro Filter
as shown
in Figure 36
and flush
it clean
by holding
it under
running
water.
Figure 36
To reinstall
the filter
system:
1. Return the Micro Filter (select models)
to its
installed
position.
2. Return the Fine Filter to its installed
position.
3. Place the Large Object Trap/Cylinder
Filter
Assembly
into its installed
position
in the
dishwasher
floor.
4_
5_
Turn the ring handle clockwise
1/4 turn until it
is locked.
Figure 37
The arrow
on the ring
handle
andthe
arrow on
the Fine
Filter
should
point to
each
other, as
shown by the circle in Figure 37.
Gently pull the ring handle to ensure that the
assembly
is locked into place.
To avoid
possibme
diswasher
damage,
do
not use harsh
chemicals,
abrasive
cmeaners_
scouring
pads (metal
or plastic),
or abrasive
cloths/paper
towels
to clean
your
dishwasher's
exterior
door
panel.
Your dishwasher's
exterior
door
panel
can
be damaged
by doing
so.
Clean
the Exterior
Door Panel
Colored
Doors
Use only a soft cloth that is lightly dampened
with
soapy water.
Stainless
Stee_ Doors
Use a soft cloth with a non-abrasive
cleaner
(preferably
a liquid spray) made for cleaning
stainless
steel. For the best results,
apply the
stainless
steel cleaner
to the cloth, then wipe the
surface.
Clean
the Door Gasket
Regularly
clean the door gasket with a damp
cloth to remove food particles
and other debris.
18