Benning MM 7 Instrucciones De Servicio página 14

Digital Multimeter for
- DC voltage measurement
- AC voltage measurement
- DC current measurement
- AC current measurement
- Resistance measurement
- Diode testing
- Continuity testing
- Capacity measurement
- Frequency measurement
- Temperature measurement
Contents:
.­­ Operating­­instructions
2.­­ Safety­­notes
3.­­ Contents­­of­­delivery
4.­­ Description­­of­­unit
5.­­ General­­data
6.­­ Ambient­­conditions
7.­­ Electrical­­data
8.­­ Measuring­­with­­the­­BENNING­­MM­­7
9.­­ Maintenance
0.­­ How­­to­­use­­the­­protective­­rubber­­holster­­
.­­ ­­ Technical­­data­­of­­the­­measuring­­accessories
2.­­ ­­ Environmental­­notice
.­­ Operating­­Instructions
This operating manual is intended for:
- electricians and
- qualified electrotechnical persons
The BENNING MM 7 is designed for measurements in dry surroundings. It must
not be used in electrical circuits with rated voltages higher than 1000 V DC and
750 V AC (for more details, see section 6 "Ambient conditions").
The following symbols are used in the operating manual and on the
BENNING MM 7 itself:

This symbol indicates an electrical hazard.

This symbol indicates sources of danger when using the
BENNING MM 7 (see documentation).
This symbol on the BENNING MM 7 indicates that the unit is
protection insulated (safety class II).
This symbol on the BENNING MM 7 indicates the fuses which it
contains.
This symbol appears in the display for a discharged battery.
This symbol indicates the "continuity-testing" application. The
buzzer provides an audible signal.
This symbol indicates the "diode-testing" application.
This symbol marks the range "capacity testing".
(DC) voltage or current.
(AC) voltage or current.
Earth (voltage to earth).
10/ 2006
Operating­­Manual
­­ BENNING­­MM­­7
B ENNING MM 7

2