Idiomas disponibles
Idiomas disponibles
Congratulations on purchasing
your Radio table flash lamp. We
hope it will give you many
years of reassuring operation.
You have purchased a modern
and reliable system.
Please read through these ope-
rating instructions carefully.
They tell you how to set up the
system correctly and explain all
the system's features to you.
Functional principle
The Radio table flash lamp
receives the radio signals from
various radio transmitters and
converts them into light signals.
It possesses a powerful flash
tube which alerts you to a
signal as well as LEDs which
indicate the type of signals
which are being received. In
addition, it is possible to
connect a vibrating pad
(accessory).
Standard components
- lisa Radio table flash lamp
- 230 V mains lead
If any parts are missing, please
immediately contact your dea-
ler or the manufacturer directly.
Setting up the system –
Setting the correct radio
channel
A special digital transmission
process ensures that the radio
signals are picked up without
errors. This process also makes
it possible to set 10 different
radio channels.
When supplied from the fac-
tory, all Radio table flash lamps
are set to channel 0. It is only
necessary to set units to other
channels if you have several
different users operating units
in the same building.
Set the channel you want by
adjusting the channel selector
switch on the left-hand side of
the unit to the required channel
number. Use a small screw-
driver to adjust this switch.
All transmitters and receivers
must be set to the same chan-
nel.
English 9
