Specific Safety Warnings - GreenWorks GD40TCS Manual De Instrucciones De Seguridad

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
it away from other metal objects
like paper clips, coins, keys, nails,
screws, or other small metal objects
that can make a connection from
one terminal to another. Shorting the
battery terminals together may cause
burns or fire.
„ Under abusive conditions, liquid
may be ejected from the battery;
avoid contact. If contact accidentally
occurs, flush with plenty of soap
and water. If liquid contacts eyes,
immediately seek medical help. Liquid
ejected from the battery may cause
irritation or burns.
SERVICE
„ Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool
is maintained.

SPECIFIC SAFETY WARNINGS

„ Keep all parts of the body away
from the saw chain when the top
handle saw is operating. Before you
start the top handle saw, make sure
the saw chain is not in contact with
anything. A moment of inattention while
operating top handle saws may cause
entanglement of your clothing or body
with the saw chain.
„ Hold the power tool by insulated
gripping surfaces
the saw chain many contact hidden
wiring. Saw chains contacting a "live"
wire may make exposed metal parts of
the power tool "live" and could give the
operator an electric shock.
„ Always hold the top handle saw with
your right hand at the top handle and
your left hand at the front handle.
Holding the top handle saw with a
reversed hand configuration increases
the risk of personal injury and should
never be done.
„ Wear safety glasses and hearing
English (original instructions)
only, because
protection.
equipment for head, hands, legs
and feet is recommended. Adequate
protective clothing will reduce personal
injury from flying debris or accidental
contact with the saw chain.
„ Do not operate a top handle saw in
a tree. Operation of a top handle saw
while up in a tree may result in personal
injury.
„ Always keep proper footing and
operate the top handle saw only when
standing on fixed, secure and level
surface. Slippery or unstable surfaces
such as ladders may cause loss of
balance or control of the top handle saw.
„ When cutting a limb that is under
tension, be alert of spring back.
When the tension in the wood fibres is
released, the spring loaded limb may
strike the operator and/or throw the top
handle saw out of control.
„ Use extreme caution when cutting
brush and saplings. The slender
material may catch the saw chain and
be whipped toward you or pull you off
balance.
„ Carry the top handle saw by the
front handle with the top handle saw
switched off and away from your body.
When transporting or storing the top
handle saw, always fit the guide bar
cover. Proper handling of the top handle
saw will reduce the likelihood of accidental
contact with the moving saw chain.
„ Follow instructions for lubricating,
chain tensioning
accessories. Improperly tensioned or
lubricated chain may either break or
increase the chance for kickback.
„ Keep handles dry, clean, and free
from oil and grease. Greasy, oily
handles are slippery, causing loss of
control.
„ Cut wood only. Do not use top handle
saw for purposes not intended. For
example: do not use top handle saw
for cutting plastic, masonry or non-
3
Further protective
and changing