Conditions; General Error Condition - VESTEL EVC04-AC22 Serie Manual De Usuario

3- To enable locked cable function, toggle DIP switch pin
3 to ON position using pointed spudger or a plastic
pointed tool. The DIP switch location is as shown in below
figure.
5- Open the front cover of the socket outlet and plug the
charging cable to the socket outlet.
4 - ERROR AND FAULT CONDITIONS

4.1 GENERAL ERROR CONDITION

If the status information LED is constant red, turn off the charging station and turn on again. if the LED
is still constant red then call an authorized service.
IB v1.0 2019
4- Close the product cover as described in the installation
manual.
6- Turn on the power to your charging station. The cable
becomes locked and the charging station starts behaving
as a cable model.
© 2019 Vestel - All rights reserved English - 13