BADU Eco Touch-pro Ficha De Montaje, Uso Y Mantenimiento página 21

Speed adjustable
1
Power
BADU Pool technologies and solutions.
WG27.50.018-P
Speed adjustable
1
Power
BADU Pool technologies and solutions.
WG27.50.019-P
01|2016
GREEN
SET
2 3
OK
0
Error
GREEN
SET
2 3
OK
0
Error
Setting the priming parameters:
The motor has to be stopped ("0"
button) to programme the priming
time. The press the "SET" button
again for at least 3 seconds until the
speed displayed in the display begins
to flash. Now the speed can be set
with which the motor is to start up
during the priming time. The speed
can be changed with the buttons "▼
▲" and saved with "OK". After the
priming speed has been set, the
length of the priming time can be
specified. The priming time can be
set between 0 (=Off) and 10 minutes.
Resetting:
The motor can be reset to the state
of delivery by pressing the "SET"
button for at least 15 seconds. The
motor stops and the three LEDs of
the fixed speeds light up.
EN 21