BADU Eco Touch-pro Ficha De Montaje, Uso Y Mantenimiento página 20

Speed adjustable
1
Power
BADU Pool technologies and solutions.
WG27.50.016-P
Notice: When the pump is used with an external control,
the connection to the external control has to be
interrupted or the external control has to be disconnected
from the mains voltage when programming the speed and
the priming time!
Speed adjustable
1
Power
BADU Pool technolgies and solutions.
WG27.50.017-P
Notice: During the suction phase it is not possible to
change the motor speed. Through pressing and releasing
of two speed buttons "1", "2" and/or "3" - the suction time
can be interrupted.
EN 20
GREEN
SET
2 3
OK
0
Error
GREEN
SET
2 3
OK
0
Error
Operation:
Press button "1", "2" or "3" to select
the preset fixed speed.
If the pump starts from a standstill, it
starts up in priming mode and
subsequently with the selected fixed
speed.
As long as the pump is in the priming
phase, the LED of the selected
speed flashes.
During running operation the pump is
started up to the fixed speed directly,
without priming time.
The motor is stopped by pressing the
button "0". The "Power" LED flashes
and the display shows "OFF".
Setting the fixed speeds:
Press the button of the fixed speed
which is to be changed and then
keep the "SET" button pressed for at
least 3 seconds until the speed
displayed in the display begins to
flash. Now the speed can be
changed with the buttons "▼ ▲". To
save the speed confirm with "OK".
To cancel and retain the original
speed press the "SET" button.
01|2016