Cleaning, Care & Maintenance; Descaling; Troubleshooting - Buffalo CC190 Manual De Instrucciones

UK
Cleaning, Care & Maintenance
• Always turn off and disconnect the appliance from the power supply before cleaning.
• Use soapy water and a damp cloth to clean the exterior of the appliance.
• Dry thoroughly after cleaning.

Descaling

In hard water areas lime scale can build up within the appliance after prolonged use. To descale the
appliance:
Pour a solution of descaler and water into the appliance.
1.
Brush the interior gently with a soft bristled brush.
2.
Discard the solution collected in the jug.
3.
Fill the appliance with clean water and turn back On to flush out the system.
4.
Flush out the system thoroughly to remove any descaler residue.
The appliance is now ready for use.
5.
Note: Use a suitable descaler and always follow the instructions on the container.
BUFFALO recommend that this appliance is descaled every 3 months or more frequently
in hard water areas.

Troubleshooting

Fault
The unit is not The unit is not switched on
working
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Power light
Thermostat fault
comes on but
water does not
reach
temperature
The tap is The tap has become loose
leaking
3
Probable Cause Action
Check the unit is plugged in correctly and
switched on
Call BUFFALO agent or qualified technician
Replace the plug fuse
Check power supply
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Tighten the tap handle