EN
• Deficient monitoring of the machine parts that are
subject to wear.
• Improperly completed repairs or use of third-party
components.
Product Description
Application
The system is designed solely for conveying the
following media:
• Lubricants with a viscosity of NLGI 3/500 000 mPa s
or less
• Container size according to the datasheet
Labelling
The conveying system is labelled with the rating plate
attached to the base frame.
The rating plate contains information for identifying
the device.
Functionality
ABNOX drum pumps are used to pump lubricants
Suitable for pumping lubricants, filling small cartridges
and tubes, and as a feed pump for ABNOX metering
valves.
22
Description of the pictured
components (Figures A – M)
1
Pump
2
Compressed air input
3
Bleed valve (pump)
4
Media outlet
5
Bleed pin (cartridge)
6
Muffler
7
Upper frame
8
Height locking mechanism
9
Lower frame
10
Collar
11
Cartridge centring mechanism
12
Follower plate
13
Container centring mechanism
14
Bleed valve (container)
15
Option DR1 pressure reduction valve
16
Option DR2 pressure reduction valve
17
Option DR3 pressure reduction valve
18
Option Electric refill-empty notification N
19
Option Electric empty notification E
20
Option Audible empty notification with
pump shut-down L
21
Wiring diagram (sensor for electric refill and
empty notification)
22
Option Connection block with pressure
gauge