Using The Appliance; Ironing Without Steam; Steam Boost - Philips ELANCE UPGRADE HV-SOLG-FU Serie Manual De Instrucciones

EnGlISh
6
4 When the temperature light goes out, wait a while before you start
ironing.
During ironing, the temperature light goes on from time to time. This
indicates that the iron is heating up to the set temperature.

Using the appliance

Note: The iron may give off some smoke when you use it for the first time. This
stops after a short while.
Steam ironing
1 Make sure that there is enough water in the water tank.
 Set the recommended ironing temperature (see chapter 'Preparing
for use', section 'Setting the temperature').
3 Set the appropriate steam setting. Make sure that the steam setting
you select is suitable for the ironing temperature selected:
- 1 - 2 for moderate steam (temperature settings 2 to 3)
- 3 - 4 for maximum steam (temperature settings 3 to MAX)
Note: The iron starts to produce steam as soon as it has reached the
set temperature.

Ironing without steam

1 Set the steam control to position 0 (= no steam).
 Set the recommended ironing temperature (see chapter 'Preparing
for use', section 'Setting the temperature').
Features
Spray function
You can use the spray function at any temperature to moisten the article
to be ironed. This helps remove stubborn creases.
1 Make sure that there is enough water in the water tank.
 Press the spray button several times to moisten the article to be
ironed.

Steam boost

A powerful steam boost helps remove stubborn creases.
The steam boost function can only be used at temperature settings
between 2 and MAX.