Battery Installation & Safety - Kapro PROLASER 875 Manual Del Usuario

BATTERY INSTALLATION & SAFETY
This tool can be operated either by designated Li – ion battery
pack, or 4 AA alkaline batteries.
Installation of the Lithium – ion Battery pack
1. Press down the latch and pull the battery cover.
2. Insert the lithium- ion battery pack with the contact terminal
towards the 2 small pins in the battery compartment.
3. Reclose the battery cover.
4. Use a standard 3.5 – 5.3 Volt charger (1Amp. - 2mp.), with
micro USB connector to charge the lithium – ion battery pack.
5. The rechargeable battery pack can be charged outside or in
side the laser battery compartment.
6. Charge the battery pack at least 2 hours before using the
laser tool for the first time.
Installation of the 4 -AA Batteries
1. Press down the latch of the cover and pull the battery cover.
2. Insert 4 new AA batteries of the same brand, according to
the polarity diagram on the inside of the battery compartment.
3. Reclose the battery cover.
7