Brother 2340CV Manual De Instrucciones página 3

•
When leaving this sewing machine unattended,
the main switch of the machine must be switched
off or the plug must be removed from the socket-
outlet.
FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY.
If your sewing machine is fitted with a 3 pin non rewireable BS plug then please read the following.
IMPORTANT
If the available socket outlet is not suitable for the
plug supplied with this equipment, it should be cut off
and an appropriate three pin plug fitted. With alterna-
tive plugs an approved fuse must be fitted in the plug.
NOTE: The plug severed from the mains lead must
be destroyed as a plug with bared flexible cords is
hazardous if engaged in a live socket outlet. In the
event of replacing the plug fuse, use a fuse approved
by ASTA to BS 1362, i.e. carrying the
as marked on plug.
Always replace the fuse cover, never use plugs with
the fuse cover omitted.
WARNING: DO NOT CONNECT EITHER WIRE
TO THE EARTH TERMINAL WHICH IS MARKED
WITH THE LETTER 'E', BY THE EARTH SYMBOL
OR COLOURED GREEN OR GREEN AND
YELLOW.
•
The wires in this mains lead are coloured in accord-
ance with the following code:
As the colours of the wiring in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug, pro-
ceed as follows.
mark, rating
ASA
The wire which is coloured blue must be connected
to the terminal which is marked with the letter 'N' or
coloured black or blue.
The wire which is coloured brown must be connected
to the terminal which is marked with the letter 'L' or
coloured red or brown.
When servicing the sewing machine, or when
removing covers or changing lamps, the ma-
chine or the electrical set must be disconnected
from the supply by removing the plug from the
socket-outlet.
Blue
Brown
Neutral
Live
1