OK. OTD 28111 Manual De Instrucciones página 28

COMPONENTS
A. Program selection knob
B. Time button (Zeit)
C. Delay button (Startvorwahl)
D. Status indicator
E. Start/Pause button
F. Display
G. Anti Grease button (Knitterschutz)
H. Gentle button (Schonen)
I. On/Off button (Ein/Aus)
J. Condensation water tank
K. Drum
L. Power cable with plug
M. Lint filter
N. Service flap air condenser
O. Adjustable feet
P. Condensation water drainage connection
Q. Service flap air inlet
R. Door with window
S. Recessed grip
T. Operation panel
BEFORE FIRST TIME USE
• Remove the product and accessories from the original packaging carefully. For disposal of the original
packaging, follow applicable legal requirements. If you have questions about correct disposal, contact
your local authority.
• Check the package contents for completeness and damage. If the package content is incomplete or
damages can be found, contact your place of purchase immediately.
• After unpacking clean the product, see chapter Cleaning and care.
INSTALLATION
Note: The tumble dryer is equipped with power cord and plug. Make sure before installation that the
wall outlet is at the desired place of installation.
Consider the dimension of the product for placing and installation.
Place the tumble dryer on an even, horizontal and steady surface. For leveling the feet are
1
adjustable and can be screwed in or out.
The dryer can be connected to drainage.
2
1. Pull down the hose.
2. Connect your drainage hose to the fitting.
3. Put the other end into a sink. Observe the max. height of the outlet of drainage hose.
Note:
If an external drainage hose is used, the condensation water tank does not to be emptied anymore.
A suitable hose holder and drainage hose are available as optional accessories.
3 Connect the power plug to the mains.
IM_OTD28111_150320_V04_HR.indb 28
28
20/3/15 6:29 PM