Power Connection - Dörr DFX-300 Manual De Instrucciones

Place the light former onto the bayonet (10) matching the 3 connecting pins over
the 3 bayonet fittings and move the light former clockwise until you hear the con-
nectors snap into place.
In order to remove the light former slide the release knob (2) in arrow direction
und hold it down – at the same time move the light former counter clockwise and
remove it.
CAUTION
Let the flash cool down before attaching or removing any light former.
04.4 USE OF REFLECTOR AND DIFFUSER UMBRELLAS
Open the reflector or diffuser umbrella. Place the umbrella bar in the umbrella hol-
der (11) and tighten the umbrella holder locking screw (5).
CAUTION
Mind the minimum distance of 30cm between umbrella and flash bulb –
Risk of fire!
DÖRR offers a wide choice of reflector and diffuser umbrellas.
05 | COMMISSIONING

05.1 POWER CONNECTION

CAUTION
CAUTION: Before connecting or removing the power connection, make sure
the main switch (23) is on position O=Off.
Insert the supplied mains adapter into the power plug socket (22) of your flash and
connect to an electric outlet.
05.2 TURNING ON/FLASH TEST BUTTON
Turn on the flash at the main switch (23) position I = On. The main switch (23) lights
up red and the power level indicator (15) is active. As soon as the LED standby signal
(19a) lights up in red colour, the flash is ready to release.
Press the flash test button (19) to release a test flash.
06 | OPERATION
During operation never touch the flash tube or the modelling light – danger of
burns and electric shock!
06.1 FLASH TRIGGER
There are several possibilities to trigger your DÖRR DFX studio flash:
06.1.1 Flash triggering through remote flash trigger
(OPTIONAL ACCESSORIES)
We recommend triggering your flash with a remote flash trigger which works wirel-
ess and reliable. You will need an optional remote trigger kit, consisting of a remote
transmitter and a remote receiver. The remote transmitter is connected with the hot
shoe of your camera while the remote receiver is connected with the SYNC socket
(21) of your studio flash.
06.1.2 Flash triggering via SYNC cord
Professional cameras offer a SYNC jack. Connect a SYNC cord (optional) to the
SYNC socket of your flash (21) and the PC jack socket of your camera. Releasing
your camera triggers the connected studio flash at the same time.
06.1.3 Flash triggering through IR flash
An IR flash (optional) emits light in infrared spectrum. IR light is invisible for human
eyes; nevertheless it will be recognized by the incorporated photo cell/slave cell
(14) and triggers the flash. Press photo cell On/Off button (16) to turn this function
on or off. When activated, the photo cell LED (16a) will light up in red. Caution: The
photo cell and IR flash need to be in direct line of sight in order to trigger correctly.
Any object within the line of sight might cause the flash not to trigger.
06.1.4 Flash triggering with another flash
The DÖRR DFX studio flash may be triggered e.g. with an on-camera flash. Mind
to turn off the pre-flash function of your on-camera flash as the photo cell/slave
cell (14) will be triggered by this signal. Make sure to turn the power of the camera
flash to a minimum, e.g. 1/128. This setting allows using the light of the on-camera
flash only to trigger the DÖRR DFX studio flash, without having another disturbing
light source.
06.2 TAKING PICTURES WITH DÖRR DFX STUDIO FLASH
After selecting the trigger mode (radio, IR flash, flash, sync cord) turn on your ca-
mera and the DÖRR DFX studio flash (main switch (23) position I = On).
06.3 CAMERA SETTINGS
06.3.1 ISO
Choose lowest ISO setting in your camera menu, e.g. ISO 100 to achieve optimum
picture results.
06.3.2 Exposure time
Choose the exposure time not shorter than the flash synchronization time of your
camera. For most cameras this value is about 1/250s (for details please see the
technical data of your camera). As standard value for studio photography 1/125s
was established. In studio photography the exposure time has no influence on the
picture result.
06.3.3 Aperture
Set the aperture to the desired value, e.g. f11.
11
CAUTION
(optional)
(optional)
(optional)
(optional)