Hella OptiRAY FLASHING Instrucciones De Montaje página 14

POSSIBLE FLASH SEQUENCES
1. Single fl ash, 2 Hz
2. Double fl ash, 2 Hz
3. Triple fl ash, 2 Hz
4. Single fl ash, 2 Hz (250 ms
off set from fl ashing sequence
1, alternating operation)
5. Double fl ash, 2 Hz (250 ms
off set from fl ashing sequence
2, alternating operation)
6. Triple fl ash, 2 Hz (250 ms off set
from fl ashing sequence 3,
alternating operation)
7. Single fl ash, 1.4 Hz, SAE
fl ashing sequence
14
8. Double fl ash, 1.4 Hz, SAE
fl ashing sequence
9. Triple fl ash, 1.4 Hz, SAE
fl ashing sequence
10. Quadruple fl ash, 1.45 Hz, SAE
fl ashing sequence
11. Double fl ash, 1.5 Hz, SAE
fl ashing sequence
12. All fl ashing sequences from
1 to 11 are called up auto-
matically, one a er another,
demonstration mode
Type approval:
Rated voltage
Operating voltage
Total current
consumption
Interference
suppression class
Power
consumption
Dome
Operating position
Protective rating
Temperature range
Inverse polarity protection
Housing
Interference
suppression class 4
Technical Data
Format: ECE R65 TA1 (E1) 004154
ECE R65 TB1 (E1) 004155
ECE R65 TR1 (E1) 004255
SAE W3-2
C-Tick E1511-0734
12 V / 24 V
9-32 V
12 V: approx. 0.9 A
24 V: approx. 0.4 A
VDE 00879,
Suppression level 4
12 V: approx. 10 W
24 V: approx. 10 W
PC
Upright
IP5KX, IPX4K, IPX9K
minus 40 ºC to plus 60 ºC
yes
EPDM
ECE R10 057696