Water Circuit - Master BC 340 Manual De Instrucciones

en
►►4.2.2. REMOTE CONTROL AND
FUNCTIONS (Fig. 8):
►POWER: Turns on or off the device.
►LOW - MID - HIGH: Increases or de-
creases the ventilation speed of the de-
vice. You can choose from three speeds:
LOW, MID and HIGH.
►COOL: Enables the cooling mode.
►WIND: Enables the ventilation mode
ONLY.
►ION: Enables or disables the ionisation
mode, that is, the release of negative ions
in the atmosphere, to make air healthier.
►TIMER: Enables to activate or deacti-
vate the delayed switch-on or switch-off
mode.
-Delayed switch-on: When the cooler is
on, press the "TIMER" button repeat-
edly until the desired time is displayed
(the number flashes), then switch off the
equipment.
-Delayed switch-off: When the cooler is
on, press the "TIMER" button repeatedly
until the desired time is displayed, then
the switch-off time is set.
►►4.3. SWITCH-OFF:
►4.3.1. Press the "ON/OFF"/"POWER"
button to switch off the appliance (Fig. 9).
►4.3.2. Drain the tank through the specific
drain plug (Fig. 10-11-12).
►►5. CLEANING AND
MAINTENANCE
WARNING: BEFORE PERFORMING
ANY MAINTENANCE OR REPAIR, DIS-
CONNECT THE POWER CABLE FROM
THE MAINS.
DEPENDING ON THE ENVIRONMENT
WHERE THE APPLIANCE IS USED,
DUST, DIRT OR WATER QUALITY CAN
AFFECT THE PERFORMANCE OF THE
UNIT. THEREFORE, CLEANING THE
FOLLOWING COMPONENTS MAY BE
REQUIRED:
►►5.1. TANK:
We recommend changing the water fre-
quently.
►5.1.1. Switch off the appliance and dis-
connect the plug from the mains (Fig.
9-6).
►5.1.2. Drain the tank through the specific
drain plug (Fig. 10-11-12).
►►5.2. WATER CIRCUIT:
►5.2.1. To ensure proper operation of the
cooler, turn off COOL mode a few minu-
tes before completely switching off the
appliance, in order to avoid stagnant wa-
ter.
►5.2.2. Once a month we recommend
performing a complete cycle using clean
water and appropriate disinfection pro-
ducts, running the cooler outdoors.
►►6. REMOTE HUMIDISTAT
CONNECTION (optional)
A remote humidistat can be connected in
series to the power supply plug, to man-
age automatic switch-on or switch-off of
the cooler.
After the humidistat has been activated,
during normal operation, the cooler switch-
es off. The re-ignition is automatic and the
operating configuration is restored keeping
the settings prior to switch-off.
CAUTION: THE ONLY SETTING THAT IS
NOT RESTORED IS THE "TIMER" FUNC-
TION, IN THIS CASE IN FACE THE COOL-
ER WILL GO IN STAND-BY CONDITION.