Dmx Linking; Bluetooth Control; D-Fi Usb Connectivity - Chauvet DJ 4BAR LTBT Guia De Inicio Rapido

EN
Menu Map
Mode
3Ch
DMX Mode 5Ch
15Ch
Static Colors C--
Automatic
P--
Programs
Auto Speed S--
Dimmer d--
Sound-
Snd
Active Mode
Custom
u--
Color Mixing
Bluetooth
bLE
Mode*
Control
SEt
Mode
®
*The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such
marks by Chauvet & Sons, LLC is under license. Other trademarks and trade names are those of their respective owners.

DMX Linking

The 4BAR LTBT can work with a DMX controller. Instructions for connecting and configuring this product for DMX
operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from www.chauvetdj.com.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 498.
Master/Slave Connection
The 4BAR LTBT uses the DMX data connection for its Master/Slave mode. Information about configuring the 4BAR LTBT
for Master/Slave operation is in the User Manual, which is available from the Chauvet website.
IRC-6 (Infrared Remote Control)
The 4BAR LTBT can be operated with the CHAUVET IRC-6. For more information about the IRC-6, download
instructions for the IRC-6 or the 4BAR LTBT User Manual from www.chauvetdj.com.

Bluetooth Control

The 4BAR LTBT can be operated with the BTAir application over a Bluetooth connection. For more information on using
the BTAir app, download the BTAir User Manual from www.chauvetdj.com.

D-Fi USB Connectivity

The 4BAR LTBT is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from CHAUVET DJ.
Simply set the DIP switch D-Fi receiving/transmitting channel, plug it into the USB port then set the product's DMX
Personality and DMX Address. Further instructions for connecting and configuring this product for D-Fi USB operation
are in the User Manual.
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may cause
damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX and manual display control/menu
buttons will be unavailable until you unplug the D-Fi USB. The priority levels are:
1. D-Fi USB
2. Wired DMX
3. IRC-6 Remote Control
4. Manual Digital Display/Menu Buttons
3
QUICK REFERENCE GUIDE
Programming Levels
d 1–510
C 1–19
P 1–8
S. 1–100
L. 1–255
Snd1–8
r. 0–255
G. 0–255
b. 0–255
S. 0–100
_ _ _ _ _
on
ir
oFF
SLAV
out
dMX
Description
3-channel DMX mode
5-channel DMX mode
15-channel DMX mode
Static colors
Automatic programs
Program speed for P 1–8
Dimmer
Sound-active programs
Custom static colors
Combine red, green, and blue
Strobe rate
Bluetooth control mode, displays Bluetooth ID
Turns infrared on or off
Enable Master/Slave with other BT products
Enable Master/Slave with non-BT products
4BAR LTBT QRG Rev. 5